---
title: How does Tacey re-check addresses and update order tags in the background?
description: Two automatic jobs: the re-check of older address results (address_recovery) and the tag update that follows a re-check (tag_resync). When they run, which orders they touch, what you see in Shopify, why a tag can lag behind the result, and what to do when it looks wrong.
canonical: https://tacey.app/docs/address-validation/how-does-tacey-re-check-addresses-and-update-order-tags-in-the-background
updated: 2026-11-16T11:12:12.073Z
---
# How does Tacey re-check addresses and update order tags in the background?

Tacey grades every shipping address when the order arrives. Two background jobs keep those results and the tags on your Shopify orders honest after that. You do not start either one, and neither one emails anybody or changes an address.

| Job | Plain words | Runs |
|---|---|---|
| `address_recovery` | Re-checks older results that have no evidence behind them | Every 15 minutes |
| `tag_resync` | Puts the right Tacey tag on an order after its result changed | Every 15 minutes |

## Re-checking older address results (address_recovery)

### What it does

Some older orders were graded from a saved copy of an earlier answer, before Tacey kept the evidence that goes with an answer. Tacey cannot re-grade such an order from what it saved, because there is nothing to re-grade. The same address on a newer order, checked live, could then read **Verified** while the older order showed a different result for the very same address.

This job fixes that. It sends each of those orders back through the same check the **Re-validate address** button uses, once for each version of Tacey's grading model. If the new answer is different, the order's result is replaced. If the check cannot be done (for example, the address service is down), the old result stays exactly as it was.

### Which orders it picks

An order is picked only when all of these are true:

- the result is **Verified** or **Needs attention**. These are the two results a grading change can move. **Undeliverable** results and the cases that need a unit number or are a PO box are never picked, because a fresh check would cost the same and say the same thing,
- the saved result holds no evidence at all from the address service,
- the order has not been re-checked yet under the current grading model,
- nobody has made a decision about the address: the customer has not fixed it or chosen **Keep my address**, and the address has not been edited in Shopify and applied.

Orders that read **Needs attention** are picked first, because a wrong flag costs you more than a missing one.

### How much it does

At most **10 orders every 15 minutes across all stores, and at most 5 per store**. A store with a long backlog is worked down over hours, and one large store cannot hold up the others. Each order is tried **once per grading model**. If that one try fails because the address service had a bad minute, Tacey does not loop. Open the order and press **Re-validate address** to try again yourself.

### What can stop it

- **Your store has uninstalled Tacey or is suspended.** Nothing is checked.
- **The country is no longer on your list.** If you narrowed the countries Tacey checks after the order came in, the order keeps the result it has. See [How do I choose which countries Tacey checks?](/docs/address-validation/how-do-i-choose-which-countries-tacey-checks).
- **A decision was made about the address in the meantime.** The order is skipped, because that decision is the answer.
- **Your plan's check limit.** The re-check runs behind the same plan limit and the same country list as any other check.
- **The saved address cannot be read back.** Tacey rebuilds the address from the copy it saved on the order. If that copy is unreadable, the order is skipped.

### How to tell it ran

Open the order in **Orders**. If the job changed the result, the **Address check** column and the checked date now match a fresh check. If nothing changed you will see nothing, and that is the normal outcome.

## Updating the Tacey tag after a re-check (tag_resync)

### What it does

Tacey writes a status tag on your Shopify order that says what the address check found:

- **tacey-validated** when Tacey is confident about the address,
- **tacey-check-address** when it is less sure and the address is worth a look.

A third status tag, **tacey-corrected**, is written when a customer or you fixed the address; this job never writes it, it only removes it when a re-check earns one of the other two.

An order that was **Not checked** gets no status tag, because Tacey did not grade it. Silence is the honest answer for "not checked".

When Tacey re-grades an order by itself (the **Re-validate address** button, the older-result re-check above, or Tacey changing its grading model) the result can change. This job then writes the tag the **saved** result earns, and removes only Tacey's other status tags from that order. It never removes a tag you added, and it never touches **tacey-edited**, which says a customer changed the order.

### How much it does

At most **10 orders per store and 40 in all every 15 minutes**. Each order costs three Shopify calls, so a re-grade of hundreds of orders is worked down over a few hours. If a write fails, the order stays waiting and is tried again at the next run, up to **6 tries**. After the sixth failure Tacey stops trying for that result, and pressing **Re-validate address** on the order starts it again.

### What can stop it

- **Tag writing is switched off for your store.** A store can have Tacey's tag write-back turned off, and the order is then left alone. There is no switch for it on a Tacey page today, so if your orders never get a tag, contact Tacey support.
- **The re-check did not produce a grade.** A check that was skipped, failed or is still pending earns no tag and removes none, so the tag stays as it was.
- **Shopify refused the write**, for example because the connection to your store needed renewing. The order waits and is tried again.

### How to tell it ran

Open the order in Shopify and look at its tags. After a re-check, usually within about a quarter of an hour when only a few orders are waiting, you should see **tacey-validated** or **tacey-check-address**, matching the result in Tacey.

## When it looks wrong

**The tag in Shopify does not match the result in Tacey.**
1. Wait 15 to 30 minutes. The tag update is a separate step that follows the re-check, and it is rate limited.
2. Open the order in Tacey and press **Re-validate address**. That re-checks the address and marks the order for a new tag write (the button also tries to write the tag straight away, and the 15-minute job is the backstop if that did not land).
3. If it still does not match after an hour, tag writing may be off for your store or Shopify may be refusing the write. Contact support with the order number.

**An order I have not touched changed its result.** That is the older-result re-check, or a change to Tacey's grading model. The new result is the more reliable one. Your customer is not told.

**An order has no Tacey tag at all.** The most likely reason is that the order was **Not checked**: its country is outside your list, your plan's orders for the period were used up, or the address service did not answer. See [What do Tacey's address check results mean?](/docs/address-validation/what-do-taceys-address-check-results-mean).

**I changed an address in Shopify and the tag did not change.** The tag follows the address check, not the edit itself. Tacey re-checks an address you changed in Shopify when Shopify reports the change, and then updates the tag. If only a note or a tag changed, the address is the same and no re-check happens.

## Still stuck?

Contact Tacey support from the chat bubble inside the Tacey app, or email hello@taceysupport.app.
